For secure, simple pairing, your audio device must be within a 1 metre range of the speaker. Once you have paired your speaker it will have a wireless connection of up to 10 metres. To connect, turn on your speaker via the ON/OFF button. Go into your settings, select and turn on Bluetooth on your device. Scan for new Bluetooth devices and select 'LEEN 7'. You will not be prompted for a pass code for pairing. (Note: Bluetooth audio connectivity can vary between devices so it can be beneficial to firstly consult with your audio source user manual for pairing instructions if unsure). Your speaker should now be connected to your device and the announcement that pairing is complete should be heard.
Your speaker allows you to take calls hands free. So should you receive a call, simply short press the “ON/OFF” button on top of the speaker. To end the call yourself, short press the same button used to answer the call. Your speaker will automatically resume music play back once the call is disconnected.
Yes, once your phone is paired complete the following steps. Short press the On/Off button. The LEEN 7 will “BEEP” once to confirm connection. You can now ask a question, say a command, call friends, create reminders and much more all simply by pressing a button on your LEEN 7 speaker. To ask another question or give another command simply short press the ON/OFF button again.
Turn your first LEEN 7 speaker on and pair to your device. Press and hold the ON/OFF button on your second LEEN 7 until it says “PAIRING” (Please ensure that your second LEEN 7 is not connected to any Bluetooth device close by). The Power/Bluetooth LED indicator will start to flash BLUE. Once successfully linked, the second LEEN 7 will say “LINK CONNECTED” and the first LEEN 7 will say “CONNECTED”. The LED indicator will stay on for both LEEN 7 speakers to confirm successful pairing. NOTE: Turning off either speaker will result in both speakers turning off. You can then turn on your first LEEN 7 and it will automatically re-pair to your audio device.