While the StreamBuds LX are charging, a red light will appear on each earbud. Once the red light has switched off, the earbud is fully charged. Each earbud has its own battery and may take a slightly different amount of time to charge.
Firstly, check the earbuds are deleted from the pairing list on the phone and turn your Bluetooth off. Place both earbuds in the charge case and leave the lid open, the red charging lights should be on for both earbuds. Remove both earbuds at the same time, they should say 'pairing' and after a short time they should both start to flash RED and BLUE. Once this happens double press the button on one of the earbuds, this will force them to sync together, you will hear a high 'beep' to confirm the command has been recognised. Once the two earbuds have paired together you will hear a lower 'beep'. You can now turn on your Bluetooth on your phone and search for StreamBuds LX in the list of Bluetooth devices.
Check that both earbuds are fully charged. Check that you only have 1 entry for StreamBuds LX in your Bluetooth menu. Make sure they are not paired to another device. Check that both earbuds are powered on and linked together, when taken out of the case each earbud should say ‘pairing’ followed by a low ‘beep’ to confirm they are paired together.
It is possible to use each earbud individually in mono. As long as you have paired to them in stereo simply remove the earbud you wish to use on its own. Even if you just want to use one earbud on its own, we recommend pairing to them in stereo first, to allow for easier use in the future.