While the StreamBuds Micro are charging, a red light will appear on each earbud. Once the red light has switched off, the earbud is fully charged. Each earbud has its own battery and may take a slightly different amount of time to charge.
When the case LED charge indicator flashes blue or does not light up when the buds are returned, then it is time to recharge the case. The LED charge indicator will flash blue while charging and will then remain a solid blue once fully charged.
Check that both earbuds are fully charged and power on when removed from the case. Check that you only have 1 entry for StreamBuds Micro in your Bluetooth menu. Make sure they are not paired to another device.
It is possible to use each earbud individually in mono. Simply remove the earbud you wish to use from the case, if you had paired the earbuds to your phone in stereo each earbud will work on its own. When you remove the second earbud, it will automatically pair to the first earbud and they will work in stereo again.
Follow the below instructions to use the touch sensor controls: Play / pause - Double tap either touch sensor Lower volume - Single tap the LEFT touch sensor Increase volume - Single tap RIGHT touch sensor Previous track - Tap and hold LEFT touch sensor Skip track - Tap and hold RIGHT touch sensor
Triple tap either touch sensor to activate Siri or Google Assistant. Listen for the familiar voice assist ‘beep’ then ask a question or state a command.
